Plastic
trailer canopies
Trailer canopies are made of ABS or polythene thermoplastic.
The material is very weather-resistant, shock-proof and
recyclable. It is easy to paint it or glue advertisements
or insert adhesive tapes on it. First remember to clean
the surface with a mild solvent, such as Sinol. Use solvent-based
or polyurethane-based paint.
*You can wash the canopy using water and / or common
car detergents.
*When using the trailer, always remember to strap down
the load. Note that YOU MAY NOT use the canopy as a strapping
aid.
*When the canopy is up, always support it with a safety
catch in order to avoid damage.
*It is forbidden to carry items on top of the canopy.
*Always remove possible snow from the canopy before use
and regularly even if you are not using the trailer /
canopy.
*The canopy is always somewhat bigger than the trailer.
When installing the canopy, check that the clearance between
the trailer and the canopy is of the same size on all
sides.
*Install the canopy according to instructions. Put the
gasket in place only after you have completed all other
stages.
*The warranty for the canopy is in force for one (1)
year from the date of purchase.
If you have any questions about the canopy, please
contact the manufacturer. See > Links
Canopy
hinge installation instructions
|
